INSTEON 2477S Uživatelský manuál

INSTEON On/O Switch 2477SQuick Start Guide

6Test your On/O Switch by tapping the paddle to turn On and O.Installation complete. You can now link your On/o Switch to the Hub.

Follow the on-screen instructions to add your On/O Switch to the INSTEON Hub.Linking to the Hub+When prompted, press and hold the On/O Switch’s set

On/Off SwitchTurn on, turn o, set schedules and create scenes for your On/O Switch using the INSTEON Hub and App.Device ControlRAW-1292 Rev 03.13.1

INSTEON On/O SwitchSet ButtonOOnOn LEDStatus LEDFor the complete Owner’s Manual and more, visit: insteon.com/support

Phillips ScrewdriverTools Needed for InstallationWire Cutter / StripperVoltage DetectorFlathead ScrewdriverDisconnect PowerAlways disconnect power bef

Basic Installation1ONONONONONONONOFFON ONTurn o power to your switch at the electrical service panel.Circuit BreakersPower is ON Power is OFFFuse Pan

2Remove the old switch and disconnect the wires. If your box lacks neutral wires, stop and contact support.Neutral Wire½”1 2!

Neutral Wire3Turn on power at the circuit breaker and use a voltage detector or multi-meter to identify line and load. Line will be energized.

4Turn o power at the circuit breaker. Connect the On/O Switch wires to the identied wires in the junction box. Verify that the wire nuts are secure

Turn o power at the circuit breaker. Connect the On/O Switch wires to the identied wires in the junction box. Verify that the wire nuts are secure

5Mount the On/O Switch into the junction box with the LED bar on the left and turn power on to the switch at the circuit breaker panel.