Insteon In-LineLinc Relay (2475S2) Manual Uživatelský manuál stáhnout pdf (Strana 5)

Page 5 of 14 Rev: 1/21/2014 7:57 AM

6) Referring to the diagrams below, use the included wire nuts to connect the fixture’s Line, Load,

Neutral, Ground and Sense wires (if using) to In-LineLinc’s corresponding wires.

7) Enable power to the switch from the circuit breaker or fuse panel.

8) Use In-LineLinc’s On and Off buttons to test that In-LineLinc is installed properly.

The load will turn on and off.

9) Link In-LineLinc to an INSTEON controller.

10) Gently place In-LineLinc into the junction box, making sure nothing could accidentally press the

buttons on its face.

11) Reinstall the fixture.

Above: wiring In-LineLinc Relay without Sense; below, wiring In-LineLinc with Sense.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Žádné komentáře

Insteon In-LineLinc Relay (2475S2) Manual Uživatelský manuál Strana 5